115
System Settings Operations Synchronizing Wireless Communications
3. Tap the System Settings button on the Home screen of the Display Device.
4. Select Paired Devices from the menu.
5. From the Paired Devices menu select Add from the toolbar.
6. When prompted select OK from the toolbar.
The Display Device searches for compatible wireless devices, then displays the results. The
Data Acquisition Device is listed as “VERDICT M2-” plus six digits of the unit’s serial number.
7. Tap to select the Data Acquisition Device from the search results list (Figure 12-5).
Figure 12-5 Sample Data Acquisition Device selection
An in progress message displays during the pairing procedure, which takes several seconds.
The Paired Devices screen displays once the procedure completes (Figure 12-6).
Figure 12-6 Sample Paired Devices screen
8. Tap the Home button on the VERDICT toolbar to return to the Home screen.
To Next Page
Loading...
