49
Scanner Operations Downloading Firmware
3. Select Scanner from the VERDICT D7 Display Device Home screen.
4. Select OK when the firmware update notification displays (Figure 5-28).
The firmware update begins and installation progress is tracked on the screen (Figure 5-30).
Figure 5-30 Sample update in progress screen
A “firmware has been successfully updated” message displays once the installation process
is complete (Figure 5-31).
Figure 5-31 Sample firmware update complete message
5. Select OK to close the message and return to Scanner operations.
The SCAN MODULE, with the latest firmware update, is now ready to use.
To Next Page
Loading...
