13
CHAIN CASE, L. H. FENDER
ITEM PART NO. DESCRIPTION
1 5-2683 ASSEMBLY, Chain Case
(Includes Items 2 Thru 13,15,16, & 31 Thru 33)
2 4-1136 CASE, Sprocket
3 2-8761 GASKET, Case Cover
4 1-1121 WASHER, Belleville (2)
5 1-0756 BEARING, Ball (2)
6 1-8963 SPROCKET & SHAFT
7 1-0614 KEY, 1/8 x 5/8" Woodruff
8 3-9778 COVER, Chain Case
9 1-0942 BEARING, Needle (2)
10 1-1086 WASHER, Nylon Thrust (2)
11 4-0355 HUB & SPROCKET
12 1-0941 CHAIN
13 9-0307 SCREW, #10-24 x 5/8" Hex Washer Self-Tap (10)
14 1-1024 PLUG, Oil Fill & Check
15 2-2785 ROLLER
16 1-0776 RING, 1/2” External Retaining (Heavy Duty)
17 3-7285 FENDER, Left Hand (25” & 28” Models) (1.628” I. D. hole)
-- 3-7958 FENDER, Left Hand (33” Models ) (1.744” I. D. hole)
18 1-4625 COLLAR, Lock (Includes P.N. 9-0776 Set Screw, 1/4-20 x 1/4")
(Used with ball bearing, item 32, only)
19 5-0918 BEARING, Left Hand Fender (Includes Item 20)
(25” & 28” Models, 8 & 10 HP)
20 1-3324 FITTING, Lube
21 1-1070 ROD, Cross-Tie
22 1-2332 CLAMP, Boot (2)
23 1-7084 BOOT, Oil Seal
24 1-1071 WASHER, Thrust Nylon
25 1-1072 WASHER, Thrust
26 9-1505 NUT, 5/8-18 Hex Nyloc
27 1-0969 NUT, 5/16-24 Hex Flange Lock
28 1-9260 O-RING (2)
29 2-3447 SPACER
30 1-2271 WASHER, Shim (As Required)
31 2-7981 WASHER, Shim (6)
32 1-4624 BALL BEARING, Left Hand Fender (33” Models)
-- 5-1451 ASSEMBLY, Left Hand Fender (Includes Fender P.N. 3-7958 &
Bearing P.N. 1-4624) (33” Models, 13 & 14 HP)
33 6-1017 GREASE, Transmission (Use 2 oz. maximum)
R. E. RIDER (EURO) SERIES 16 & 18 MANUAL No. 06103
NOTE: See Pages 14 & 15 For Illustration Of Brake Lever Assembly & Related Parts.
To Next Page
Loading...
Need help?
General
