Snom 870 - SETTING UP THE PHONE; DELIVERY, INSTALLATION, AND INITIALIZATION

© 2009 snom technology AG
man_snom870_v101_en
8
snom 870  User Manual
Setting up the Phone
setting up the phone
Delivery Content
Please check whether the package contains the following parts:
1. Base phone unit
2. Footstand with bracket and 2 screws
3. Handset
4. Handset cord
5. Ethernet cable
6. Power supply 5 V DC with EU/US connector
PLEASE NOTE: Using the wrong power supply may cause damage
to the phone. Use only the power supply included with the phone.
Phone installation anD initialization
snom phones are plug-and-play. Once you have connected the hardware and
entered the data required by your provider or network administrator, you are
good to go.
Installation
1. Connect the long end of the handset cord to the connector labelled " "
on the back of the phone. Connect the short end of the handset cord to
the handset.
2. Place the cord in the cable guide in the right lower corner on the back of
the phone.
3. Attach the footstand with the bracket and the 2 screws. Choose between
55° or 33° inclination.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46