socomec COUNTIS E43 - Technical Characteristics

COMPLIANCE
European EMC Directive No. 2004/108/EC (15/12/2004)
LV Directive No. 2006/95/EC Dated 12 December 2006
IEC 62053-21 / IEC 62052-11
SYSTEM CONNECTION
Supply types / number of wires Single phase 2 wires 230V / Two phase 2 wires 400V
 
 
Management Detection of cabling error
Frequency 50 and 60 Hz (± 5 Hz)
SUPPLY Autosupplied
CONSUMPTION
 
 
CURRENT (TRMS)
Starting current (Ist) 10 mA
Minimum current (Imin) 50 mA
Transition current (Itr) 250 mA
Reference current (Iref) 5 A
Permanent overload (Imax) 6 A
Short-term over-current 120 A for 0.5 s (EN50470-3 and IEC 62053-21)
VOLTAGE (TRMS)
 
 
POWERS
Active Yes
Reactive No*
 
ENERGY
Active Yes
Reactive Yes
 
Bidirectional metering (EA+ and EA-) Yes
 
ACCURACY
Active energy Class 1 (IEC 62053-21)
TARIFFS
Tariff management Yes*
Number of tariffs managed 4*
Tariff exchange input No*
METROLOGICAL LED
Impulse weight 10000 impulses / kWh
Colour Red
DISPLAY
Type 7 Digit LED with blue back-lighting
 
 
List of functions displayed Cf. table below
* Functions available only via communication, the complete list of these functions is given in the down-
loadable JBUS/MODUS communication table.
EN
46
COUNTIS E43 - Réf. 537 885 B
CARACTÉRISTIQUES TECHNIQUES
TECHNICAL CHARACTERISTICS - TECHNISCHE DATEN - CARATTERISTICHE TECNICHE -
TECHNISCHE KENMERKEN - CARACTERÍSTICAS TÉCNICAS - CARACTERÍSTICAS TÉCNICAS