SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
Permanent failure of
unbalanced output
current
Input mode setting error
permanent failure
Check the PV input mode
(parallel/independent mode) Settings
for the inverter. If not, change the
PV input mode.
Input overcurrent
permanent fault
Input hardware
overcurrent permanent
failure
Internal faults of inverter, switch OFF
inverter, wait for 5 minutes, then
switch ON inverter. Check whether the
problem is solved.
If no, please contact technical support.
Bus voltage unbalanced
permanent failure
Check the USB port of the inverter
Check the Wifi port of the inverter
Check the bluetooth connection of the
inverter
Internal faults of inverter, switch OFF
inverter, wait for 5 minutes, then
switch ON inverter. Check whether the
problem is solved.
If no, please contact technical support.
Communication board
EEPROM error
Communication board
FLASH error
Safety parameters
version error.
SCI communication
error (DC)
SCI communication
error (AC)
SCI communication
error (Fuse)
Inconsistent software
versions
Contact for technical support and
software upgrades.
The inverter is performed a forced
shutdown
The inverter is performed a remote
shutdown.
The inverter is performed with a
Drms0 shutdown.
The inverter is performed for remote