Software Bisque Paramount MX - Page 116

Paramount MX User Guide
116 | Page
Activating ProTrack
1. From TheSkyX Professional Edition, choose the Connect command from the Telescope menu to
connect to the Paramount MX.
2. Turn on the Activate ProTrack checkbox on the ProTrack tab of the TPoint Add On window to
view a table of ProTrack corrections that will be applied to tracking.
3. Turn on the Enable Tracking Adjustments checkbox apply the corrections to the mount’s
position while tracking.
Details about the ProTrack tab on the TPoint Add On window can be found in the TPoint Add On User
Guide.