Software Bisque Paramount MX - Getting Started with Theskyx Professional Edition

Paramount MX User Guide
74 | Page
8. The Telescope window’s Status text shows the current state of the mount.
Getting Started with TheSkyX Professional Edition
If you are not familiar with TheSkyX Professional Edition’s basic telescope controls, please refer to
TheSkyX Professional Edition User Guide for details about basic mount control features, including:
Feature Quick Start Reference
Adding TPoint Add On Pointing Samples Add Pointing Sample button on the Telescope window
Centering the Telescope Cross Hairs Center Cross Hairs button on the Telescope window
Clearing the Park Position
Clear Park Position command from the Shut Down pop-up
menu on the Telescope window.
Connecting, Disconnecting the Mount Connect, Disconnect commands from the Telescope menu
Finding Home
Find Home command from the Start Up pop-up menu on
the Telescope window or double-tap the joystick
Mount Status Shown on Telescope window
Moving or Jogging the Mount Move/Jog controls on the Telescope window
Parking
Park command from the Shut Down pop-up menu on the
Telescope window
Setting the Park Position
Set Park Position command from the Shut Down pop-up
menu on the Telescope window
Slewing
Slew button on the Telescope window
Star Searching
Star Search command from the Tools pop-up menu on the
Telescope window
Star Synchronization
Synchronize command from the Start Up pop-up menu on
the Telescope window
Telescope Configuration Telescope Setup command from the Telescope menu
Tracking Spacecraft Track Satellite button on the Telescope window
Tracking Stars, Comets, Asteroids Set Track Rates button on the Telescope window
Turning Sidereal Tracking On
Turn Sidereal Tracking On command from the Tools pop-up
menu on the Telescope window