Paramount MX User Guide
88 | Page
Figure 39: The Show Status tab on the Bisque TCS window.
Parameter Description
Current Position Shows the value of the mount’s current position.
Current Encoder
Shows the current encoder position for both axes. For each axis, the
current encoder value changes when mount is tracking; it remains fixed
when not tracking.
Non-sidereal Rate
Shows a number that represents the incremental tracking rate (above or
below the sidereal rate).
When the mount is tracking at the sidereal rate, values for both RA and
Dec are zero. If either rate is non-zero, the mount is tracking at a non-
sidereal rate.
See the Set Track Rates command in TheSkyX Professional Edition User
Guide details about setting tracking rates.
Status Shows an internal motor status value.
Motor Shows the motor status.
Control State A number that indicates the current “state” of the control system.
Servo State A number value that indicates the current “state” of the DC Servo motor.
Joystick Index A number that shows the joystick’s index position.
To Next Page
Loading...
