What does it mean if my SolarMax 4200S displays 'Temp. limitation'?
If your SolarMax Inverter displays 'Temp. limitation', it indicates that the internal temperature is too high, and the device is reducing output. Check the function of the external fan, and inspect and clean the fan grille.
What to do if the display on my SolarMax 4200S Inverter remains blank?
If the display on your SolarMax Inverter is blank, there are several potential causes. First, ensure the DC insulation switch is turned on. If it is, check if the irradiance is too low and wait until it increases. Also, verify that the strings are properly connected to the PV generator. If none of these solutions work, it could indicate an internal failure.
Why does the status LED flash orange on my SolarMax 4200S?
If the status LED on your SolarMax Inverter is flashing orange, it could be due to temperature limitations. Try cleaning the fan grids and improving ventilation in the operations room.
Why does the graphics display flash periodically on my SolarMax Inverter?
The graphics display on your SolarMax Inverter might be flashing periodically because the irradiance is too low. Wait until the irradiance is high enough.
Defines the manual's scope, intended users, and guidance on its use.
Outlines critical safety warnings and defines the inverter's intended operational purpose.
Details the internal architecture, safety, and control functions of the inverters.
Illustrates the external components and physical dimensions of the inverter unit.
Provides instructions for safe transport, storage, and selecting an optimal installation site.
Details cooling systems, lightning protection requirements, and the scope of delivery.
Guides on mounting the inverter and general installation steps.
Details electrical connections, protection, and data communication setup.
Lists essential checks to perform before starting up the inverter for the first time.
Guides through the automatic initial setup process and country-specific parameter selection.
Explains how to safely operate the inverter, including start-up and shutdown.
Explains how to use the display and navigate through menus.
Details how to access and interpret measured values and statistical data.
Introduces Sputnik's MaxComm platform for data recording and monitoring.
Explains the necessary settings for Ethernet and RS485 communication interfaces.
Lists available accessory components for enhancing inverter functionality.
Describes the meaning of different status messages and LED indicators.
Provides guidance on diagnosing and resolving common issues.
Outlines maintenance tasks for the plant operator.
Details the steps for safely removing and disposing of the inverter.
Presents a comprehensive summary of technical specifications.
Shows efficiency performance and temperature-dependent output reduction.
Lists parameter settings tailored for different country regulations.
Explains the terms, duration, and limitations of the product warranty.
General| AC Voltage | 230 V |
|---|---|
| Output Voltage | 230 V |
| Efficiency | 96% |
| Frequency | 50/60 Hz |
| Waveform | Sinusoidal |
| Protection Features | Overvoltage, Short Circuit |
To Next Page
