SolarMax 5000P - Page 36

98
Function / parameter Description Unit / status
GVMMAX2-ENA GVMMAX2 function status Disabled/enabled
GVMMA X2-THR Limit value V
GVMMAX2-DLY Tripping time s
GVM10AMAX Checking the maximum permissible average value
for mains voltage over the last 10 minutes
V
GVM10AMAX-ENA GVM10AMAX function status Disabled/enabled
GVM10AMAX-THR Limit value V
GVM10AMAX-DLY Tripping time s
GFMMIN1 Checking the minimum permissible mains fre-
quency (limit 1)
-
GFMMIN1-ENA GFMMIN1 function status Disabled/enabled
GFMMIN1-THR Limit value Hz
GFMMIN1-DLY Tripping time s
GFMMAX1 Checking the maximum permissible mains fre-
quency (limit 1)
-
GFMMAX1-ENA GFMMAX1 function status Disabled/enabled
GFMMA X1-THR Limit value Hz
GFMMA X1-DLY Tripping time s
GFMMIN2 Checking the minimum permissible mains fre-
quency (limit 2)
-
GFMMIN2-ENA GFMMIN2 function status Disabled/enabled
GFMMIN2-THR Limit value Hz
GFMMIN2-DLY Tripping time s
GFMMAX2 Checking the maximum permissible mains fre-
quency (limit 2)
-
GFMMAX2-ENA GFMMAX2 function status Disabled/enabled
GFMMA X2-THR Limit value Hz
GFMMAX2-DLY Tripping time s
AIS Detection of island operation -
AIS-ENA AiS function status Disabled/enabled
AIS-DLY Tripping time s
RSCD Detection of recurring short circuits on the AC side -
RSCD-ENA RSCD function status Disabled/enabled
RBCM Monitoring the continuous leakage current -
RBCM-ENA RBCM function status Disabled/enabled
RBCM-THR Maximum permissible leakage current A
RSCM Monitoring the leakage current step value -
RSCM-ENA RSCM function status Disabled/enabled
AOT Auto-test (only available with the "Italy" country
setting)
-
AOT-ENA AOT function status Disabled/enabled