SolarMax 5000P - Page 37

en
99
Function / parameter Description Unit / status
DCCIM Monitoring the DC component in the AC current -
DCCIM-ENA DCCIM function status Disabled/enabled
DCCIM-THR Maximum permissible DC component in AC current A
DCCIM-DLY Tripping time s
Limitation
Function / parameter Description Unit / status
ACPPL Maximum increase of the active power during grid
connection
-
ACPPL-ENA ACPPL function status Disabled/enabled
ACPPL-MGDT Increase % of Pac nom/
min
ACPPL-INI ACPPL at every boot Disabled/enabled
ACPPL-RCN ACPPL at boot after grid disconnection through
coupler breaker
Disabled/enabled
ACPL Limit of active output power -
AC P L- L M T Limit value W
APPL Limit of the apparent power -
APPL-LMT Limit value VA
OCL Limit of the output current -
OC L-L M T Limit value A
PFLM2 P(f) mode 2 -
PFLM2-STRTFQ Start frequency Hz
PFLM2-RDN Reduction of active power
% of P
M
/Hz
PFLM2-RNC Increase to rated output power % of Pac nom/
min
PFLM3 P(f) mode 3 -
PFLM3-STRTFQ Start frequency Hz
PFLM3-STOPFQ Stop frequency Hz
PFLM3-RDN Reduction of active power
% of P
M
/Hz
PFLM3-RNC Increase to rated output power % of Pac nom/
min
PFLM3-UFQTHR Maximum permissible mains frequency Hz
PFLM3-LFQTHR Minimum permissible mains frequency Hz
PFLM3-UVTHR Maximum permissible mains voltage V
PFLM3-LVTHR Minimum permissible mains voltage V
PFLM3-MOT Checking duration s