What to do if the SolarShine SR981 Water System pump works, but the flow rate shows 0.0L/min?
If the pump is working, but the flow rate display reads 0.0L/min, the blade of the electrical flow meter may be blocked. To resolve this, dismount the pipe from the solar station and clean the pipe until the flow rate appears on the display.
Why the SolarShine SR981 Water System solar pump doesn’t operate even if switch-on conditions are satisfied?
If the solar pump isn’t working even when switch-on conditions are met, it could be due to an interrupted pump power supply. Check the pump power cable to ensure it is properly connected and functioning.
How to troubleshoot a SolarShine Water System controller that does not appear to function at all?
If the controller isn't functioning, it might be due to an interrupted power supply or a program malfunction. Check the controller's power cable and fuse to ensure they are working correctly.
General| Brand | SolarShine |
|---|---|
| Model | SR981 |
| Category | Water System |
| Language | English |
To Next Page