Ordering Information
52
Example: RVS-DN 210 - 400 - 230 - 230 - 9 - S
RVS-DN xxxx - xxx - xxx - xxx - x - x
Starter FLC (1)
Mains voltage (2)
Control voltage (3)
Control inputs (4)
Options (5)
Front panel (6)
(1) Starter FLC: 8, 17, 31, 44, 58, 72, 85, 105, 145, 170, 210, 310, 390, 460, 580, 820, 1100, 1400, 1800, 2150,
2700, 3000, 3500 Amp
(2) Mains voltage Specify For
50/60Hz 230 220- 240 Vac + 10%-15%
400 380- 440 Vac + 10%-15%
480 460- 500 Vac + 10%-15%
600 575- 600 Vac + 10%-15%
690 660- 690 Vac + 10%-15%
1000 850-1100 Vac + 10%-15% (Special – Please Consult Factory)
(3) Control Supply Voltage Specify For
(terminals 1-3) 115 110-120 Vac + 10%-15%
50/60Hz 230 220-240 Vac + 10%-15%
DC 90-250 Vdc + 10%-15%
(4) Control Input Voltage Specify For
(terminals 4-9) 115 110-120 Vac + 10%-15%
50/60HZ or DC 230 220-240 Vac + 10%-15%
24 24- 48 Vdc
(5) Required Options Specify For
For more than one option 0 No options
indicate, for example, 3+4 3 Comm. RS-485 (MODBUS, PROFIBUS, MODBUS-TCP) (c)
(Comm. + Insulation) 4 Insulation tester (b)
5 Analogue card – Thermistor in + Analogue out .(b)
8 Harsh environment treatment (must be factory supplied)
9 Preparation for by-pass contactor
A 536mm special width (for size C only)
B Line & Load Bus Bars at the bottom (sizes C & D)
D Remote Panel Mounting replacing the original (with 1.5m cable).
DK Remote Panel Mounting kit with MMI, option #L and 1.5m cable.
L Illuminated LCD
M Lloyd’s ENV-1, ENV-2 approval, GL as well (consult factory)
T Tachometer for special drive systems (consult factory) (b)
U UL & cUL Approval (8-820A)
(6) Front Panel Specify
For
S Standard
Notes: (a) RVS-DN ratings 1100-3500 have to be used with a by-pass.
(b) RVS-DN size A (8-72A), options should be factory supplied.
(b) Only one option, either #4, # 5 or # T may be installed in one starter.
(c) Consult factory for any communication protocol other than MODBUS.
C:\WINDOWS\Desktop\RVS-DN Instruction Manual 12_10_2003.doc
To Previous Page
Loading...
Need help?
General
