Need help?Do you have a question about the Solcon HRVS-DN and is the answer not in the manual?
General| Brand | Solcon |
|---|---|
| Model | HRVS-DN |
| Category | Controller |
| Language | English |
Read manual, disconnect power, check parts. Instructions for safe operation and maintenance.
High voltage risks, grounding importance, and power factor capacitor precautions.
Line, By-pass, Motor terminals, contactors, and supply sequence.
Adjusts initial torque, inrush, acceleration time.
Too many starts, long start time, overload, under voltage.
Under current, phase loss, auto reset.
Over voltage, phase loss, phase sequence, wrong connection.
Fault types, reset procedures, auto reset options.
Steps for changing and saving parameter values.
STARTER FLC, MOTOR FLA, CURRENT LIMIT settings.
Undercurent, Overload, Unbalance, Ground Fault, Voltage trip settings.
Soft start curves, pulse level, initial voltage, current.
Auto reset, bypass trip, curve 0 fault, power on no start.
Unbalance, GND fault, PWR ON/NO START, By-pass open, Too many starts.
Long start time, O/C Shear Pin, Overload, Under Current.
Phase loss, phase sequence, wrong connection, SCR faults.
Supply voltage, PIV, frequency, control supply.
Parameter ranges and protection trip conditions.
To Next Page
