Solid State Logic UF8 User Manual

Pro Tools Tutorial
23
SSL UF8 User Guide
LCD Layout
Top Zone - Provides a label for the function assigned to the soft key directly above.
Auto State - Shows the current automation state of the track (when Show Auto is enabled in SSL 360°).
Track Record Enabled (REC) - Indicates that the track has been record-enabled.
TrkNam - Displays the 4-character track name.
FaderdB - Provides a readout of the current fader position.
Label/Value - Displays a label or value readout for the parameter currently assigned to the V-Pot.
DAW Track Metering - 12-segment track metering + clip
V-Pot Readout Bar - Displays the position of the currently assigned V-Pot function.
Track Metering Power Tip: The F1 command, available in the DAW commands list SSL 360° will clear clips on the
track metering. You can assign this command to any of the Quick Keys or User keys on UF8. Alternatively, you'll find
this command pre-assigned to the 6th Soft Key in User Bank 3.
Enlarged view of LCD screen
DAW Track Metering
V-Pot Readout Bar
Track Record-Enabled
V-Pot Encoders
Soft Keys

Solid State Logic UF8 Specifications

General

Brand	Solid State Logic
Model	UF8
Category	Recording Equipment
Language	English