Cubase/Nuendo Tutorial
53
SSL UF8 User Guide
Send Settings - Global
Alternatively, Global mode provides you with access to the advanced send settings for the tracks currently on the UF8 surface.
For example, you can control a send parameter (e.g. level), of FX Send 1 across multiple tracks at once using the V-Pots.
• This is an example of a V-Pot assignment mode that is accessed by pressing and holding the SHIFT MCU Command (the key
labelled FINE/SHIFT on UF8).
• Press and hold the FINE/SHIFT key and then press the FX SEND key. This will select FX Send 1 but you can move through
the rest of the FX Sends by continuing to keep FINE/SHIFT held and repeatedly pressing the FX SEND key
• Use the PAGE keys to move between parameter pages.
Each V-Pot assignment mode may vary slightly in terms of how it operates so it's important to refer to the Mackie
MCU Pro section of Steinberg's Remote Control Devices PDF for more information.
Selected FX Send Send Parameter Page Number
To Next Page
Loading...
Need help?
General
