83
Operator Manual
PROBLEM POSSIBLE CAUSE
REMEDY
Brakes Works
When Fully Pressed
Wrong adjustment of brake pedal Check and Adjust.
ELECTRICAL
Battery terminal loose or rusting of
terminal
Less specific gravity
Battery terminal loose
Battery discharged fully
Faulty starter motor
Loose or rusted terminals
Belt loose
Faulty battery
Electrical
System Not Working.
Starter Motor
Not Working.
Battery Not
Charging
Clean and tight the terminals
Replace or fill electrolyte up to level
Tightened
Recharge or replace battery
For repair contact your dealer
Clean and tight terminal
Check belt tension
Replace
To Next Page
Loading...
