9
4.Installation
4.1 Select a Location for the EPM
To select a location for the EPM, the following criteria should be considered:
The temperature of the EPM could up to 75 C.
The EPM is designed to work in extreme temperature range is from -25 C to 60 C.
The EPM should be kept minimum 300mm clearance from the other device.
The EPM cannot be placed in direct sunlight.
4.2 Mounting the EPM
Please attach mounting plate on to wall horizontally where to install the product.
Then mark A , B and C to fix mounting plate.(see Figure 4.1)
B
A
Drill three φ8 holes and insert expandable shell into the holes which make the bracket
alignment. After that fix the bracket on the wall.(see Figure 4.2)
Figure 4.1 Bracket
Expansion screws
Bracket
Figure 4.2 Fix the bracket on the wall
C
o
o
o
To Next Page
Loading...
