21
4
If the steaming wand is used for dispensing hot water, the steaming wand
dispenses water residue before the steaming function activates. For good steamed
milk, rst dispense the residue before putting the steaming wand into the milk.
3. Check if the steaming function button l constantly lights up white.
4. Lower the nozzle of the steaming wand 5 a few millimeters into the milk.
5. Rotate the steaming knob z counterclockwise to switch on the steaming wand 5.
6. Wait until the milk is steamed as desired.
4
When you cannot touch the side of the milk jug for longer than 3 seconds, the
temperature is optimal (approximately 149 °F.
7. Rotate the steaming knob z clockwise to switch o the steaming wand 5.
4
When not switched o, the steaming function automatically switches o after 2
minutes.
8. Clean the nozzle of the steaming wand 5 with a damp cloth.
9. Rotate the steaming knob z to remove all milk from the steaming wand 5.
10. Press one of the cup extraction buttons j k to cool down the steaming function.
The cup extraction buttons j k start ashing. When the cup extraction buttons j
k constantly light up white, the system is ready for making coee.
11. Pour the frothed milk directly into an espresso.
12. Clean the milk jug r with water or in a dishwasher after use.
V USING THE HOT WATER FUNCTION
Risk of burn injury. Parts of the appliance become hot during
use.
• During or directly after the steaming process, only touch the
steam and hot water wand by using the thermo-insulated
loop. The steaming wand gets hot.
• Do not point the tip of the steaming wand directly at the
bottom of the cup.
• Never point the steam and hot water wand towards people,
animals, or moisture sensitive items.
To Next Page
Loading...
Need help?
General
