29
6. Gently squeeze the water lter cartridge 9 to remove air bubbles from the lter.
7. Rinse the water tank 8 with water.
8. Insert the water lter cartridge 9 into the bracket in the water tank 8 with the
selector facing downwards.
9. Fill the water tank 8 with water up to the MAX marking.
10. Insert the water tank 8 into the appliance.
11. Place a container (min. 0.14 gal) underneath the brewing head 4.
12. Plug in and switch on the appliance.
13. Press the programming button d.
14. Press the single cup extraction button j to activate the automatic rinsing cycle.
When the appliance beeps twice and the cup extraction buttons light up white, the
appliance is ready for use.
V USING THE BREWING HEAD CLEANING CYCLE
Clean the appliance with a cleaning tablet when the corresponding alarm is displayed
(see section Alarms).
For cleaning the brewing head, please use cleaning tablets which are suitable for
espresso machines.
4
For best results, we recommend SOLITABS (art. no. 993.02), which is available in
selected countries.
To clean the appliance with a cleaning tablet:
1. Plug in and switch on the appliance.
H
To Next Page
Loading...
