33
7. Insert the water tank 8 into the appliance.
8. Place a large container (> 0.66 gal) underneath the brewing head 4.
9. Aim the steaming wand 5 into the container.
10. Plug in and switch on the appliance.
11. Press the programming button d.
12. Press the steaming function button l to start the descaling process.
The descaling process takes 20 minutes. During the process:
• Rotate the steaming knob z clockwise when the display shows CL.
• Rotate the steaming knob z counterclockwise when the display shows OP.
4
If the descaling procedure is interrupted (e.g. during a power loss) we recommend
completing the procedure only after the interruption has been resolved. Rinse the
appliance thoroughly when the process is nished.
When the rst part of the process is nished the display indicates H2O and the appliance
is ready for rinsing:
13. Remove the water tank 8 from the appliance (see image J).
14. Empty the water tank 8 above a sink.
15. Rinse the water tank 8 multiple times under a tap.
16. Fill the water tank 8 with cold tap water.
17. Insert the water tank 8 into the appliance.
18. Empty the container and the drip tray 6.
19. Place back the container (step 6 through 7).
20. Press the steaming function button l to start the rinsing process. During the
process:
• Rotate the steaming knob z clockwise when the display shows CL.
• Rotate the steaming knob z counterclockwise when the display shows OP.
When the rinsing process is nished the appliance beeps twice.
21. Remove the water tank 8 from the appliance (see image J).
22. Empty the water tank 8 above a sink.
23. Rinse the water tank 8 multiple times under a tap.
24. Insert the water lter cartridge 9 into the bracket in the water tank 8 with the
selector facing downwards.
25. Fill the water tank 8 with cold tap water.
26. Insert the water tank 8 into the appliance.
When the cup extraction buttons light up white, the appliance is ready for use.
To Next Page
Loading...
Need help?
General
