6. Operation6. Operation
6.4.8 Communication Data
The screen shows the internal data of the Inverter (see Figure 6.14), which is for service
technicians only.
01-05: 01 25 E4 9D AA
06-10: C2 B5 E4 9D 55
Figure 6.14 Communication Data
6.4.6 Yearly Energy
YES=<ENT> NO=<E SC>
Select: 2020
Figure 6.12 Select year for yearly energy
2020: 0017513kWh
2019: 0165879kWh
Figure 6.13 Yearly energy
Press UP/DOWN key to move one date from another.
The function is for checking the energy generation for selected year.
Press DOWN key to move the cursor to day and year, press UP key to change the digit.
Press Enter after the date is fixed.
6.4.7 Daily record
The screen shows history of changing settings. Only for maintance personel.
The display shows the 100 latest warn messages (see Figure 6.15). Screens can be scrolled
manually by pressing the UP/ DOWN keys. Press the ESC key to return to the previous menu.
Msg000:
T: 00-00 00:00 D: 0000
Figure 6.15 Warning Message
6.4.9 Warning Message
6.5 Advanced Settings - Technicians Only
NOTE:
To access to this area is for fully qualified and accredited technicians only.
Please follow 6.4 to enter password to access this menu.
Select Advanced Settings from the Main Menu to access the following options:
1. Select Standard
2. Grid ON/OFF
3. 24H Switch
4. Clear Energy
5. Reset Password
6. Power Control
7. Calibrate Energy
8. Special Settings
9. STD. Mode Settings
10. Restore Settings
11. HMI Update
12. Internal EPM Set
13. External EPM Set
14. Restart HMI
15. Debug Parameter
16. DSP Update
17. Compensation Set
18. FAN Test
6.5.1 Selecting Standard
This function is used to select the grid's reference standard.
YES=<ENT> NO=<ESC>
Standard:AS4777-02
Figure 6.17
.33..32.
6.4.10 Inspection
The display shows the Standard NO. and Work Mode of the inverter.
Figure 6.16 Inspection
Standard No.
Work Mode:
NULL
To Next Page
Loading...
