UM0027_ SOL APOLLO Series 7.4-22K_EN_V02_0523 33
Inserting the upper mounting screws
1. Install the upper mounting screws (A) in the upper holes (B).
The recommended torque is 4.4Nm.
2. Ensure the screw protrudes at a length (X) out from the wall.
The length of (X) is recommended to be 3mm (0.12inch).
Figure 15
Installing the EV charger on the wall
1. Align the openings (A) over the upper mounting screws (B).
The upper mounting screws support the EV charger.
Figure 16
To Next Page
Loading...
