What to do if Solplanet Battery Charger is blinking 4 times?
If your Solplanet Battery Charger is blinking 4 times, it indicates that the supply voltage is too low. Verify that the supply voltage is between 185 and 275 V. If the voltage is outside of this range, contact your local electricity supplier. If it is within range, contact the Solplanet service provider.
What to do if Solplanet SOL APOLLO Battery Charger is blinking 3 times?
If your Solplanet Battery Charger is blinking 3 times, it means the supply voltage is too high. Ensure the voltage is between 185 and 275 V. If it's outside this range, contact your local electricity supplier. If it's within range, contact the Solplanet service provider.
Covers manual validity, target audience, symbols, and terms used in the document.
Details intended use, safety standards, important warnings, and label symbols for safe operation.
Illustrates and describes components of socket and cable EV charger versions.
Explains system diagrams, power management, and Dynamic Load Balancing (DLB) function.
Details LED status meanings and available communication interfaces like WLAN, BLE, and NFC.
Covers electrical planning, cable sizing, permits, and essential site preparation.
Guides on selecting the mounting location and performing the physical installation steps.
Details mechanical/electrical checks, app connection, and RFID card activation.
Step-by-step instructions for starting and stopping EV charging for both charger versions.
Provides cleaning advice and a troubleshooting guide for common EV charger issues.
Lists AC inputs/outputs, general data, operating temperatures, and dimensions.
Details safety regulations, protective devices, and wireless network specifications.
Covers recycling, EU conformity, and service contact information.
General| Brand | Solplanet |
|---|---|
| Model | SOL APOLLO Series |
| Category | Battery Charger |
| Language | English |
To Next Page
