Award BIOS Setup 27
Gate A20 Option Choose Normal or Fast (default).
This option allows the RAM to
access the memory above 1MB by
using the fast gate A20 line.
Typematic Rate
Setting
Choose Enabled or Disabled
(default). Enable this option to
adjust the keystroke repeat rate.
Typematic Rate
(Chars/Sec)
Range between 6 (default) and 30
characters per second. This option
controls the speed of repeating
keystrokes.
Typematic Delay
(Msec)
Choose 250 (default), 500, 750, and
1000. This option sets the time
interval for displaying the first and
the second characters.
Security Option Choose System or Setup (default).
This option is to prevent
unauthorized system boot-up or use
of BIOS Setup.
PCI/VGA palette
Snoop
Choose Enabled or Disabled
(default).
Video BIOS
Shadow
Enabled (default): Map the VGA
BIOS to system RAM.
Disabled: DonÕt map the VGA BIOS
to system RAM.
C8000-CBFFF to
DC000-DFFF
Shadow
These options are used to shadow
other expansion card ROMs.
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
To Next Page
Loading...
