32
Video Off Method Choose Blank , DPMS, or V/H
Sync+Blank (default). You can
chose either DPMS or V/H
Sync+Blank when the monitor has
the Green function. You need to
choose Blank when the monitor has
neither the Green function.
MODEM Use IRQ Assign the IRQ number to the
modem which is being used so that
the ring signal can wakeup the
system. The default setting is 3
(COM2).
Doze Mode This option sets the CPU speed
down to 33MHz during this mode.
Standby Mode
Suspend Mode
These two options allow you to
choose the mode for the different
timers. The Standby Mode turns off
the VGA monitor, and the Suspend
Mode turns off the CPU and saves
the energy of the system.
HDD power Down Time is adjustable from 1 to 15
minutes. When the set time has
elapsed, the BIOS sends a command
to the HDD to power down, which
turns off the motor.
IRQx (Wake-Up
Event)
Set these IRQs individually.
Activity detected from any enabled
IRQ channel (ON) will wake up the
system.
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
To Next Page
Loading...
