Chapter 4 BIOS Setup
73
Onboard Serial
Port 1 / Port 2
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
UART Mode Select The second serial port on your system may offer
a variety of infrared port modes. Click here for a
description of various modes. (Click your
browser’s Back button, or your right mouse
button, to return to this page.)
The choices: Standard; HPSIR; ASKIR
Parallel Port Mode Select an operating mode for the on-board parallel
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
Onboard Parallel Port This item allows you to determine onboard parallel
port controller I/O address setting.
The choices: 378H/IRQ7; 278H/IRQ5; 3BC/IRQ7;
Disabled.
UR2 Duplex Mode This item allows you to select the IR half / full
duplex function.
The choices: Half; Full.
ECP Mode Use DMA Select a DMA channel for the port.
Game Port Address This item allows you to select the Game Port
Address.
The choices: Disable; 201; 209
PWRON After PWR-
Fail
Off: Disable Power Lost Resume function.
On: Enable Power Lost Resume function.
Former Sts: Use Former status.
The choices: Off; On; Former Sts.
To Next Page
Loading...
