65KIV/KIV2
72
ACPI Function Select Enabled only if your computer’s operating
system supports the Advanced Configuration and
Power Interface (ACPI) specification. Currently,
Windows NT 5.0 supports ACPI.
POWER MANAGEMENT
• When this option is chosen, the following item appears for user’s configuration.
Item Help
Menu Level
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
User Define
Disabled
Disabled
Disabled
Power Management
HDD Power Down
Doze Moed
Suspend Mode
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Power Management
* Power Management This option allows you to select the type (or degree)
of power saving for Doze, Standby, and Suspend
modes.
This table describes each power management
mode:
Max Saving
User Define
Min Saving
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out period in
the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
To Next Page
Loading...
