65KIV/KIV2
74
MODEM Use IRQ Name the interrupt request (IRQ) line assigned to
the modem (if any) on your system. Activity of the
selected IRQ always awakens the system.
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
Soft-Off by PWRBTN When Enabled, turning the system off by pressing
the on/off button places the system in a very low-
power-usage state.
State After Power
Failure
This field lets you determine the state that your PC
returns to after a power failure.
The choices: On; Off; Auto.
Suspend Mode After the selected period of system inactivity, the
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes.
Doze Mode When enabled and after the set time of system
inactivity, the CPU clock will run at slower speed
while all other devices still operate at full speed.
Standby Mode After the selected period of system inactivity, the
fixed disk drive and the video shut off while all other
devices still operate at full speed.
HDD Power Down When enabled and after the set time of system
inactivity, the hard disk drive will be powered down
while all other devices remain active.
To Next Page
Loading...
