10
Edition: 2021-04 Original document - Mi-205 EN
2.2 Designated use of the valve
2.2.1 Use
The valves are appropriate to be used in pulp and paper industry, chemical
industry, shipbuilding industry, energy industry and offshore industry.
Particular data to the operation and limit values are specified on the data sheet
“Si-205EN (MTV) and Si-202EN (FSV)”.
The operating values, limit values and setting data must not deviate from the
values specified in the operating manual and correspondig information sheet
without consulting the manufacturer! The manufacturer cannot be held liable
for any damages resulting from non-observance of the operating manual.
The user is responsible for knowing the impact from the media on the valve,
the resulting wear rate, and establishing maintenance interval, to maintain safe
operation.
2.2.2 Liability for non-designated use
Using the valve for other purposes than those mentioned previously is considered
contrary to its designated use. For resulting damages of this, SOMAS Instrument
AB is not liable! The user take the risk.
To Next Page
Loading...