SOMAS MTV - MTV DN 350-500, with Metal Seat

54
21
23
18
20
19
7
8
3
6
4
2
1
17
14
15
10
9
Edition: 2021-04 Original document - Mi-205 EN
6.10.3 MTV DN 350-500, with metal seat
Fig.6-13 DN 350-500, with metal seat
1 Key 6 Stuffing box gland 10 Cover plate 18 Gasket
2 Shaft, upper (DN 200-500) 7 Valve body 14 Seat 19 Plug
3 Stud 8 Stuffing box kit 15 Disc 20 Screw
4 Nut 9 Screw 17 Shaft, lower (DN 200-500) 23 Bearings
Following parts are included in the sealing kit for valves with metal seat:
DN 350-500: Pos. No. 1, 8, 14 and 18.