6
Edition: 2021-04 Original document - Mi-205 EN
1 Introductory information
To enable you to find information quickly and reliably in the operation manual,
this chapter familiarises you with the structure of the operating manual.
This manual uses symbols and special characters which make it easier for you to
find information. Please read the explanations of the symbols given in the section
below.
Ensure that you read all the safety instructions in this operating manual very
carefully.
You will find safety instructions in section 2, in the foreword to the sections and
before any working instructions.
1.1 Explanation of warnings, symbols and signs
1.1.1 Warnings
Warnings are used in this operating manual to warn against injury and material
damage. Always read and observe these warnings! Warnings are identified by the
following symbols:
In this manual are used diverse types of safety and warning notices:
Danger!
International
Safety symbol
Type of danger.
Advise for imminent danger. Not attention of the advices could be mortal or cause severe
injuries as a consequence.
Explanation of the countermeasures.
Warning!
International
Safety symbol
Type of danger.
Advise for imminent danger. Not attention of the advices could cause severe injuries or property
damage as a consequence.
Explanation of the countermeasures.
Attention!
International
Safety symbol
Type of danger.
Advise for possible danger. Not attention of the advices could cause property damage as a
consequence.
Explanation of the countermeasures.
To Next Page
Loading...