11
Copyright © 2016 Somfy SAS. All rights reserved.
Pictures are for illustration purposes only
CONTENTS
WELCOME 2
1. SAFETY 3
2. NINA IO TIMER REMOTE CONTROL 5
3. USING NINA TIMER IO 16
Control a device 17
My function 18
Natural Control function 22
Launch a scenario 26
Alarm function 27
Timer function 29
Create typical days 34
Programme the week 50
View programmed actions 53
4. CUSTOMIZING NINA TIMER IO 60
Customize devices 60
Customize groups 64
Customize scenarios 70
Define timer settings 75
Customize the remote control 80
5. ADVANCED SETTINGS 86
6. TROUBLESHOOTING 98
7. ABOUT NINA TIMER IO 99
Charge the battery
1. Insert the end of the charger into the back of the base.
2. Plug the charger into an electrical outlet.
3. Make sure Nina Timer io is turned on: button in ON position at the back of the remote control.
4. Place Nina Timer io on the base.
Wait about two hours when the Nina Timer io battery is fully drained.
Replace the battery
1. Remove the back case of the remote control to access the battery cover.
2. Turn off Nina Timer io remote control and remove the battery cover by pushing it down.
3. Unplug the battery and remove it from the remote control.
When the battery is removed, replace it with a new one. Turn on Nina Timer io and put back its
battery cover and its back case. See safety instructions Safety, page 3.
Separate the batteries from other types of waste and recycle them via a local
recycling centre.
Do not use tools to handle the ON/OFF button at the back of the product.
3
1
2
4
3
2
1
To Next Page
Loading...
Need help?
General
