88
Copyright © 2016 Somfy SAS. All rights reserved.
Pictures are for illustration purposes only
CONTENTS
WELCOME 2
1. SAFETY 3
2. NINA IO TIMER REMOTE CONTROL 5
3. USING NINA TIMER IO 16
Control a device 17
My function 18
Natural Control function 22
Launch a scenario 26
Alarm function 27
Timer function 29
Create typical days 34
Programme the week 50
View programmed actions 53
4. CUSTOMIZING NINA TIMER IO 60
Customize devices 60
Customize groups 64
Customize scenarios 70
Define timer settings 75
Customize the remote control 80
5. ADVANCED SETTINGS 86
6. TROUBLESHOOTING 98
7. ABOUT NINA TIMER IO 99
First installation of Nina Timer io
Pair devices (1/2)
Once the Nina Timer io remote control has been started up, pair the devices by following the steps
indicated by Nina Timer io. Only devices already set can be paired with Nina Timer io.
There are 3 types of devices:
• Devices associated only with an individual control point (1W: without feedback)
• Devices associated with a centralized control point (2W: with feedback)
• Devices without control point
Individual controls without feedback function can be used for the visual control of devices in one room.
These devices can be identified by the following symbols:
Centralized controls with feedback function can be used to control all devices in the home.
Users receive constant information about whether or not a command has been correctly executed, and
about any problems encountered.
These devices can be identified by the following symbols:
The pairing must start with the 2W centralized control. If there is no 2W centralized control in
the installation, pair with 1W individual controls.
The number of devices on Nina Timer io is limited to 50 products. A warning pop-up window is
displayed when the 40th and 50th device are added.
...
Start Nina Timer io 87
Pair devices 88
Place devices in groups/rooms 90
Finish the installation 91
To Next Page
Loading...
Need help?
General
