SOMFY Roller Blind - Page 10

Step 13 / 14
BLINDS SUPPLIED WITHOUT A SOMFY CONTROL
If you didn’t order a control with your blind(s), then the
control you already have requires pairing to the blind.
The blind supplied has been set up with the up/down
direction correctly dened and the stopping positions
preset.
• Wake the motor up (see previous step)
• Briey press the Up & Down buttons together on
your control and release – the blind will jog Up/Down.
• Briey press the program button on the back of the
control – the blind will jog Up/Down.
• The control is now paired to the blind motor.
Use the directional buttons to test operation and refer
to the ‘Stop Position Adjustment’ section to ne tune
the stop positions to your desired position.
Version 41
10