SOMFY Sonesse 30 - Advanced Shade Operations; Re-adjust Lower Limit Position; Manual Shade Activation

C
SOMFY SYSTEMS, INC. 2/07 P.7 REV.2
1) Press the DOWN directional on the transmitter. Shade will travel
to the pre-set DOWN limit.
button
Press & hold
MY (stop) Button
Press DOWN
Button
my
Press &
hold UP
& DOWN
Button
my
my
Press &
hold Either
UP or DOWN
Button
my
my
my
my
1.
2.
4.
3.
OPTION THREE
Re-adjusting Lower Limit (DOWN Shade Position)
2) Once shade stops at pre-set down limit, press and hold the UP and
DOWN s simultaneously on the transmitter until the shade jogs.button
3) Press and hold either the UP or DOWN on the transmitter to adjust
shade to new position.
4) Press and hold MY (stop) until shade jogs. New lower limit (Down
stop position) is now added to memory.
button
button
1) Press YELLOW on motor head until shade begins to operatebutton
Sonesse 30 Programming & Operation Instructions
TM
OPTION FOUR
Manual Activation of Shade
2) Press YELLOW button again to stop.
NOTE: Shade should already be programmed in order to activate motor.
Program Button
Yellow Button
Motor Head
Solar Control, LLC | 888-550-4836
SolarControlLLC.com