3-3
15. Heading The ship heading information is shown. If heading information
is not input from external equipment, it will not be displayed.*
16. Course The course of the user’s ship is shown. If course information
is not input from external equipment, it will not be displayed.*
17. Depth The water depth information is shown. If water depth
information is not input from external equipment, it will not be
displayed.*
18. Water temperature The water temperature is shown. If water temperature
information is not input from external equipment, it will not be
displayed.*
19. Wind speed/wind direction
The wind speed and wind direction are shown. If the wind
speed and wind direction information is not input from external
equipment, it will not be displayed.*
20. Event Information The information of the event mark is shown. You can select
event information from "Relative"; "Deviation"; and
“Latitude/longitude.”
"Relative" shows the horizontal distance, depth, and compass
bearing.
"Deviation" shows the deviation distance and deviation speed.
"Latitude/longitude" shows that of the event mark.
If “Latitude/longitude” is set with the latitude and longitude
information of the user’s ship not being input from external
equipment, “Latitude/longitude” will not be displayed.*
21. Stabilization This function reduces the influence of ship wavering on the
screen as caused by the shaking of the ship. The stabilization
mode is activated by menu selection in the order of "MENU” –
“SUB SCREEN” – “STABILIZATION” – “ON."
To Next Page
Loading...