5 Press OPTIONS.
The option menu in the fiont panel display turns off.
About speaker output of each surround setting
The table below describes the options when you connect all the speakers to the unit.
The default setting is [A.F.D. Multil ("A.F.D. MULTI").
Sound from Surround setting Effect
Depending on the source. [A.F.D. Standard] The system discriminates the sound format of the source and
"A.F.D. STD" presents sound as it was recorded/encoded.
(AUTO FORMAT
DIRECT STANDARD)
[A.F.D. Multi]
"A.F.D. MULTI"
(AUTO FORMAT
DIRECT MULTI)
• [Dolby Pro Logic]
"PRO LOGIC"
• [Dolby PL I1 Movie]
"PLII MOVIE"
• [DTS Neo:6
Cinema]
"NEO6 CIN"
• [DTS Neo:6 Music]
"NEO6 MUS"
[2ch Stereo]
"2CH ST."
• 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from the 5 1
channel speakers by duplicating 2 channel source sound
across each speaker.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
• 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from the 5 1
channel speakers
[Dolby Pro Logic] ("PRO LOGIC") perfom_s Dolby Pro
Logic decoding
[Dolby PL IXMovie] ("PLII MOVIE") performs Dolby
Pro Logic II movie mode decoding
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
• 2 channel source: The system simulates surround sound
from 2 channel sources and produces 6.1 channel sound.
[DTS Neo:6 Cinema] ("NEO6 CIN") performs DTS
Neo:6 Cinema mode decoding.
[DTS Neo:6 Music] ("NEO6 MUS") perfom_s DTS
Neo:6 Music mode decoding.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
The system outputs the sound l¥om the front speakers and
subwoofcr regardless of sound format or number of channels.
Multi-channel surround formats are downmixed to 2
channels.
32u_
To Next Page
Loading...
