Sony BDV-E980 - Screen Settings

For customers in Mexico and Latin America:
htt p://esupport.sony.com/LA
During a software update, "UPDATING"
appears in the front panel display. After the
update completes, the main unit automatically
turns off. Please wait for the software update to
complete; do not turn the main unit on or off. or
operate the main unit or TV.
• [DVD Aspect Ratio]
[Letter Boxl: Displays a wide picture with black
bands on the top and bottom.
[Pan &Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
[ScreenSettings]
• [3D Output Setting]
[Auto]: Normally select this.
[Off[: Select this to display all contents in 2D.
• 3D video from the HDMI (IN 1) orHDMI (IN 2)jack
is output regardless of this setting.
• [TV Screen Size Setting for 3D]
Sets the screen size of your 3D compatible TV.
•This setting does not apply to 3D video from the
HDMI (IN 1) or HDMI (IN 2) jack.
• [TV Type]
[16:91: Select this when connecting to a wide-
screen TV or a TV with a wide-mode function.
[4:31: Select this when connecting to a 4:3
screen TV without a wide-mode function.
• [Screen Format]
[Or_inall: Select this when connecting to a TV
with a wide-mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
[Fixed Aspect Ratio]: Changes the picture size
to tit the screen size with the original picture
aspect ratio.
• [Cinema Conversion Mode]
[Auto]: Normally select this. The unit
automatically detects whether the material is
video-based or fihn-based, and switches to the
appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
• [Output Video Format]
[HDMII: Normally select [Autof Select
[Original Resolution] to output the resolution
recorded on the disc. (When the resolution is
lower than SD resolution, it is scaled up to SD
resolution.)
[Component Video]: Select the resolution that
suits your TV.
[Videol: Automatically sets the lowest
resolution.
• If no picture appears when setting [HDMI] or
[Component Video] resolution, try another resolution
setting.
• When connecting via the COMPONENT VIDEO
OUT jack and [Component Video] is selected, BD-
ROM playback of protected content is only supported
at 480i* output resolution (pages 22, 29).
* 480i/576i for Mexican and Latin American
models.
58u_