Sony CCD-TR44 - Editing Onto Another Tape

Editing onto Another Tape
You can create vour own video program by editing with any other 0 8 mm, Hi0 Hi8, VMS VHS, SVHSj S-
VHS, VHSH VHSC, SiVHSH S-VHSC, fB Betamax or H*iBetai ED Betamax VCR that has video/audio inputs.
After connecting the camcorder to the VCR (p. 18),
( 1 ) Turn the POWER switch to PLAYER.
(2) Insert d bl.ink t.ipe (or d tdpe voii want to record over) into the recording; VCR. Then insert vour
recorded tdpe into tlie camcorder.
( 3 ) Pla\ back the recorded tape on the camcorder until you locate the point where vou \\ ant to start
editing. Then set the camcorder to playback pause mode
( 4 ) Set tlie recording V^CR to recording pause mode.
( 5 ) Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps .1 to h.
To Stop Editing
Press ■ STOP on the camcorder and VCR.
Use of the EDITSEARCH button
To play back a tape in the forward or reverse direction keep pressing EDITSEARCH during playback
pause, ^'ou can play back still pictures successively at specific intervals by pressing EDITSEARCH
intermittemtlv