Customizing Your Camcorder
52
TBC
For TRV128/228/328/428:
DNR
For TRV128/228/328/428:
AUDIO MIX
For TRV260/265:
You can adjust the audio balance between ST1 (the originally recorded sound)
and ST2.
b Notes
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
GON Select to correct jitter (horizontal picture shake during playback).
OFF Select to not compensate picture distortion when playing back a tape
on which you have dubbed repeatedly or recorded TV game signals.
GON Select to eliminate color noise in the picture.
OFF Select to minimize picture artifacts in a picture containing lots of
movement.
To Next Page
Loading...
