Sony CCD-TRV128 - Start Recording While Checking the Subject on the Lcd Screen; View the Recorded Picture on the Lcd Screen

Quick Start Guide
Quick Start Guide
9
3 Start recording while checking the subject on the LCD screen.
The date and time is not set up in the default setting. To set the date and time, see page 17.
4 View the recorded picture on the LCD screen.
a Remove the lens cap.
Lens cap is not attached
when you purchase your
camcorder (p. 91).
b Press OPEN and
open the LCD panel.
c While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA lamp.
The power turns on.
d Press REC START/
STOP.
Recording starts. To
change to standby mode,
press REC START/STOP
again.
a Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b Press (rewind).
c Press (play) to
start the playback.
To stop, press .
To turn off the power, slide the
POWER switch up to (CHG)
OFF.