– 1 –
SERVICE MANUAL
DP-IF5000
MICROFILM
DIGITAL SURROUND PROCESSOR
SPECIFICATIONS
Modulation System Frequency modulation
Carrier wave frequency Right channel 2.8 MHz
Left channel 2.3 MHz
Transmission distance Approx. 10 m
Frequency response 20 – 20,000 Hz
Distortion rate 1% or less (1 kHz)
Audio inputs Optical input
(square-type) × 1
Analog input (pin jack
right/left) × 1
Power requirements DC 9 V (from the
supplied AC power
adapter)
Dimensions (w/h/d) Approx. 85 × 190 × 180
mm
Mass Approx. 1.0 kg
(1000 g)
Design and specifications are subject to
change without notice.
•
DP-IF5000 is the component model block one in
MDR-DS5000.
COMPONENT MODEL NAME FOR MDR-DS5000
DIGITAL SURROUND PROCESSOR DP-IF5000
CORDLESS STEREO HEADPHONES MDR-IF5000
•
Manufactured under license from Dolby Laboratories Licensing
Corporation.
DOLBY, the double-D symbol a , “PRO LOGIC”,
“Dolby Digital (AC-3)”, and “VIRTUAL DOLBY DIGITAL” are
trademarks of Dolby Laboratories Licensing Corporation.
Notes on Chip Component Replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Ver 1.1 1999. 02
US Model
Canadian Model
AEP Model
UK Model
E Model
To Next Page
Need help?
General
