Sony DSLR-A200 Instruction Manual (DSLR-A200) User Manual

110
Changing the noise reduction setting
When you set the shutter speed to a second or longer (Long exposure
shooting), the noise reduction is turned on for the same duration as the
shutter was open.
This is to reduce the grainy noise typical in a long exposure. When noise
reduction is in progress, a message appears and you cannot take another
picture. Select [On] to prioritize the image quality. Select [Off] to prioritize
the timing of shooting.
MENU button t 2 t [Long exp.NR] t [Off]
Note
• Noise reduction is not performed on continuous shooting or continuous bracketing
even when it is set to [On].
When shooting with the ISO set at 1600 or above, the camera reduces the
noise that becomes more noticeable when the camera sensitivity is high.
Select [On] to prioritize the image quality. Select [Off] to prioritize the
timing of shooting.
MENU button t 2 t [High ISO NR] t [Off]
Note
• Noise reduction is not performed on continuous shooting or continuous bracketing
even when it is set to [On].
Disabling the noise reduction at a long exposure shooting
Disabling the noise reduction at a high ISO sensitivity

Sony DSLR-A200 Instruction Manual (DSLR-A200) Specifications

General

Model	DSLR-A200
Effective Pixels	10.2 megapixels
Sensor Type	CCD
Sensor Size	23.6 x 15.8 mm
Autofocus Points	9 points
Continuous Shooting Speed	3 fps
LCD Screen Size	2.7 inches
LCD Screen Resolution	230, 400 dots
Viewfinder Coverage	95%
Storage Media	CompactFlash Type I/II, Microdrive
Type	Digital SLR camera
ISO Sensitivity	ISO 100-3200
Shutter Speed	1/4000 to 30 sec
Viewfinder Type	Optical
Lens Mount	Sony A-mount
Battery	NP-FM500H
Weight	532 g (body only)
Dimensions	130.8 x 98.5 x 71.3 mm