94
Note
• When you play back the image on a TV or a computer, the image will be displayed
in the portrait position even if [Manual rotate] is selected.
To return to the normal playback screen
Press the button.
Note
• When you copy rotated images to a computer, “Picture Motion Browser” contained
on the CD-ROM (supplied) can display the rotated images correctly. However, the
images may not be rotated depending on the software.
An image can be enlarged for closer examination. This is convenient to
check the focus condition of a recorded image.
Rotating an image
1 Display the image you want to
rotate, then press the button.
button
2 Press the center of the controller.
The image is rotated counter-clockwise. When you want to do another
rotation, repeat step 2.
• Once you rotate the image, the image is played back in the rotated position,
even if you turn off the power.
Enlarging images
1 Display the image you want to
enlarge, then press the button.
button
To Next Page
Loading...
