36
A VIDEO OUT/USB terminal
(104, 120)
B Memory card cover
C Memory card insertion slot (21)
D Memory card eject lever (22)
E Hooks for shoulder strap (27)
F REMOTE terminal
• When connecting the RM-
S1AM/RM-L1AM Remote
Commander (not supplied) to
the camera, insert the plug of
the Remote Commander in the
REMOTE terminal, aligning
the guide of the plug on the
guide of the REMOTE
terminal.
G DC IN terminal
• When connecting the AC-
VQ900AM AC Adaptor/
Charger (not supplied) to the
camera, turn the camera off,
then plug the connector of the
AC Adaptor/Charger to the DC
IN terminal on the camera.
H Battery cover (17)
I Tripod receptacle
• Use a tripod with a screw length
of less than 5.5 mm (7/32 inch).
You will be unable to firmly
secure the camera to tripods
having screws longer than 5.5
mm (7/32 inch), and may
damage the camera.
Sides/Bottom
To Next Page
Loading...
