41
Before your operation
Selecting a function/setting
You can select a function for shooting or playback from the menu list. To
display the menu list, press the Fn (Function) button, (Drive)
button, or MENU button.
In this instruction manual, the process of selecting a function with the
controller from the menu list is described as follows:
Example: Fn button t [White balance] t Select the desired
setting
When you start the operation, an operation guide of controller functions
will be displayed at the bottom of the screen. Please refer to the guide when
operating the camera. The step-by-step description of the above example is
as follows:
Example: When the Fn button is pressed.
From the menu list, use the controller to
move the cursor to the setting of your
choice and execute the selection.
: Press v/V/b/B on the controller to
move the cursor.
z: Press the center button to execute the
selection.
1 Press the Fn button.
To Next Page
Loading...
