Using the shooting function
67
Using the shooting function
Selecting the focus method
There are two methods for adjusting the focus: autofocus and manual focus.
• To select the area used for focusing, set up [AF area] (page 70).
Using autofocus
1 Set the focus mode switch to AF.
2 Look into the viewfinder.
The subject inside the focus area comes into focus automatically (Eye-Start
AF).
3 Press the shutter button halfway
down to check the focus and shoot
the image.
• When the focus is confirmed, the focus
indicator changes to z or
(page 68).
• The sensor used for focusing in the AF
area illuminated briefly in red
(page 70).
Focus area sensor
Focus indicator
Shooting technique
Focus area
To Next Page
Loading...
