58
To use Program shift
Notes
• If you turn the camera off and on or a certain period of time is passed, Program shift
“P
S
” or “P
A
” is canceled and returned to “P.”
• When Program Shift “P
S
” is selected, the (Camera shake warning) indicator is
not displayed.
1 Press the shutter button halfway
down to adjust the focus.
The correct exposure (shutter speed and
aperture value) determined by the camera
is indicated.
Shutter speed
2 Rotate the control dial to select
your desired combination while
the focus is achieved.
The recording mode indicator is switched
to “P
S
” (Shutter speed priority program
shift), and the shutter speed and aperture
value are changed.
• Switch to “P
A
” (Aperture priority
program shift) when you want to select
a combination by reference to the
aperture value (page 59).
P
S
3 Shoot the subject.
Aperture value
Aperture
value
Shutter speed
To Next Page
Loading...
